THE DSE-10 Control Pendant is designed for ergonomic control of hoists and machinery.  These wire connected units are used for controlling DC chain hoists and DR ROpe hoists in applications with up to three motion achses.  

These Control Pendants are available for two different control technologies : 

• DSE-10C/CS : control pendants to control DC chain hoists, travelling hoists and cranes with an innovative triState interface available with 2 stage pushbuttons or variable pushbuttons
• DSE-10R : control pendants with a CAN bus interface prepared for the safe control of DR rope hoists, travelling hoists and especially DR cranes that are fitted with CAN bus-based safety control 

• No interal wiring is required in the pendant housing
• Housing is made of high-quality thermoplastic which is resistant to impacts
• Protective insulation to VDE 0100 part 410, section 6.2
• Switching distabces and forces to DIN 33 401, holding force <8N
• IP 65 enclosure to DIN VDE 0470 T1. and EN 60 529 as standard
• Housing is non-flammable, climate and corrosion proof
• Resistant to fuels, salt water, grease, oils and alkaline solutions
• Complete DSE-10C/CS control pendants with part numbers are provided with pre-defined symbols
• Symbols : self-adhesive labels that are resistant to abrasion.  Arrow symbols correspond to FEM and ISO 15012.

• To control DR rope hoists via CAN bus interface
• Housing characteristics and design as for DSE-10C/CS
• DSE-10R variants fitted with 2-stage pushbuttons or variable pushbuttons for precisely controlling inverter-fed drives  
• Infrared interface for service work
• Integrated display to show operating and service data, e.g.
• Load display incl. load-proportional bar display
• Load reduction display
• Display of switching statuses of universal outputs
• Crab/crane selection display
• Service interval
• Safety function
• Additional comprehensive information menu (e.g. remaining service life, basic hoist data, error memory)